Taha Z

@taha_zier
5,0(2)

Operations Driven Process Simulation Engineer, PhD

Algerien
Arabisch, Französisch, Englisch
Einige Informationen werden in englischer Sprache angezeigt.
Über mich
Results-oriented Process Simulation Engineer with Ph.D in Refining Engineering. I specialize in process modelling & optimization using Aspen HYSYS and Aspen Plus. I've solid engineering & operation experience in the Oil&Gas industry. I deliver accurate process models, equipment datasheets, process drawings and comprehensive basis of design, operating procedures and process studies reports. I've been able to improve processes and drive efficiency through clear communication and collaboration within multidisciplinary teams. Let’s connect now and discuss how I can support your project.... Mehr lesen

Kompetenzen

t
taha_zier
Taha Z
offline • 
Durchschnittliche Antwortzeit: 1 Stunde

Meine Dienstleistungen

Maschinenbau-Nachhilfe
I will perform process simulation and optimization using aspen hysys and aspen plus
5,0(2)
Maschinenbau-Nachhilfe
I will perform thermal design and rating of heat exchangers using htri and aspen edr

Portfolio

Arbeitserfahrung

Process Engineer

JGC Algeria • Vollzeit

Oct 2022 - Present3 yrs 7 mos

Engineering & Project Support Services. As Process design engineer, I am responsable to : ▪ Prepare basis of design ▪ Develop and update process drawings, PFD and P&ID ▪ Size equipment and instruments (Pump, Control Valves, RO, Lines, Vessels, Exchangers, Columns...) ▪ Simulate processes and issue HMB ▪ Prepare process datasheets for equipment ▪ Prepare operating procedures ▪ Perform hydraulic analysis for manifolds and flowlines/trunkline ▪ Contribute to Process Hazard Analysis, HAZOP and What-if ▪ Prepare technical reports (Hydraulic analysis, Scope of Work, Simulation report…) Engineering Standards (JGC, TEMA, API 660, API 661, GPSA, API 14E, API 12J, API 520, API 521, API 571, API 553, ISO 5167 et ISA 75) -------------------------------------- Facility : CPF - Well hook-up, Oil stabilization, Oily Water Treatment, NGL Recovery, Gas Injection, Water Injection and WAGI. As Process Operations Engineer within the Engineering department at GB, I am responsible to: ▪ Work closely with the operation team to tackle day-to-day operational upsets ▪ Simulate equipment, model calibration and optimization using Plant Data ▪ Act as the MOC project focal point for revamping projects ▪ Prepare operating and commissioning procedures (Experience with Natural Draft Fired Heater) ▪ Assist the commissioning and start-up activities: PSSR, Operational start-up and Performance test ▪ Report monthly progress on my MOCs ▪ Initiate contact and define scope of work with operations team, engineering contractors and/or supplier ▪ Collaborate with a multidisciplinary team ▪ Assist in Technical Evaluation of Bids (TBE) ▪ Participate in incident investigations, RCA on TapRoot ▪ Prepare CTRRs and review CTRs of engineering contractors ▪ Participate in Process Hazard Analysis sessions : HAZOP and WHAT-IF ▪ Review and comment Process Engineering deliverables such as: Feasibility study reports, Hydraulic calculation reports, SOPs, Instruments and equipment datasheets, … ▪ Conduct site surveys

2 Bewertungen
5,0

(2)
(0)
(0)
(0)
(0)
Zusammensetzung der Bewertung
  • Kommunikation
    5
  • Qualität der Lieferung
    5
  • Preis-Leistungs-Verhältnis der Lieferung
    5
1–2 von 2 Bewertungen
Sortieren nach:
Am relevantesten
    M

    marouahsn27

    Wiederkehrender Kunde

    ES

    Spanien

    5

    I am completely satisfied with working with this freelancer. They demonstrated a high level of attention to detail and ensured that all requirements were implemented accurately without the need for repeated clarification. They showed an excellent understanding of the project’s objectives and even suggested...

    Bis zu 50 $

    Preis

    4 Tagen

    Dauer

    gig

    Maschinenbau-Nachhilfe

    Hilfreich?
    Ja
    Keine
    M

    marouahsn27

    Wiederkehrender Kunde

    ES

    Spanien

    5

    I am completely satisfied with working with this freelancer. They demonstrate a high level of attention to detail and ensure that all requirements are implemented accurately without the need for repeated clarification. They showed an excellent understanding of the project’s nature and objectives, and...

    Bis zu 50 $

    Preis

    5 Tagen

    Dauer

    gig

    Maschinenbau-Nachhilfe

    Hilfreich?
    Ja
    Keine