I will a 3d design for solidworks and cad


Über diesen Service
Cam Mates: Specifically for the valve train to ensure the lifters follow the cam lobe profile.
Gear Mates: To link the crankshaft and camshaft at a 2:1 ratio, ensuring the valves open at the correct point in the combustion cycle.
Limit Mates: To prevent the piston from traveling beyond its Top Dead Center (TDC) and Bottom Dead Center (BDC).
Rotating Parts (Crank & Cam): Use Revolved Boss/Base for the main journals. For the crankshaft counterweights, use Extruded Boss with heavy Fillets to simulate the casting or forging process.
The Engine Block: This is often modeled using Multi-Body Parts. You create the main block volume, then use the Combine (Subtract) tool to remove the cylinder bores and water jackets.
The Cylinder Head: Utilize Swept Boss/Base to create complex intake and exhaust port geometries that follow specific airflow paths.
Bevorzugte Lieferart
Bitte informiere den Freelancer über alle Präferenzen oder Bedenken in Bezug auf den Einsatz von KI-Tools bei der Ausführung und/oder Lieferung deines Auftrags.
Lerne SRIDHAR kennen
DISNEYER
- AusIndien
- Mitglied seitJuli 2025
Sprachen
Tamil, Englisch
