Kategorien durchsuchen
Entdecken
Fiverr Pro
Deutsch
$
USD
I will smart battery management pcb for ev solar bess, stm32 esp32 embedded firmware
PCB Design
Hello there,
I’m James Williams, an Electronic and Embedded Systems Engineer specializing in PCB development, embedded firmware, microcontrollers, IoT, and electronic product development. I work with ...
Über diesen Service
Need a reliable Battery Management System (BMS) PCB for an EV, solar storage system, or BESS project? I provide professional electronics engineering for smart battery management boards, embedded firmware, and production-ready PCB solutions.
I can develop BMS solutions for Li-ion, LiFePO4, NMC and other battery packs, including cell voltage monitoring, passive/active balancing, over-voltage, under-voltage, over-current, short-circuit and temperature protection.
My solutions can integrate STM32, ESP32, CAN, RS485, I2C, SPI, UART, ADC, current sensors, temperature sensors, contactors, MOSFETs and battery monitoring ICs.
Services include:
- BMS schematic & PCB layout
- STM32/ESP32 embedded firmware
- Battery monitoring & cell balancing
- CAN/RS485 communication
- BOM & fabrication-ready files
- 3D PCB visualization
- Prototype support & testing
Whether you need a compact EV BMS, solar battery controller, or scalable BESS platform, I can help turn your requirements into a reliable electronics solution.
Message me before ordering to discuss your battery voltage, cell count, current rating, communication interface and project requirements.
FAQ
Can you develop BMS PCBs for EV, solar, and BESS applications?
Yes. I can create BMS solutions for EV battery packs, Li-ion, LiFePO4, NMC, solar storage, and BESS applications.
Can you integrate STM32 or ESP32 with the BMS?
Yes. I can integrate STM32 or ESP32 with battery monitoring, cell balancing, temperature sensing, CAN, RS485, UART, I2C, and SPI.
What do you need before starting the project?
Please provide your battery chemistry, cell count, voltage/current ratings, protection requirements, communication interfaces, and any existing files or datasheets.
